Concrete Patios and Walkways in Lubbock
Patios and walkways are the most common flatwork add-ons after driveways. On the flat South Plains, where water sits, the slope and drainage matter as much as the finish.
Signs you may need this
- Back yard with no usable hard surface
- Muddy path from drive or gate to the door
- Worn or heaved old pavers or stepping stones
- Cracked, uneven walkway that is a trip hazard
- Wanting a grill or seating area
What the work usually involves
- Lay out size, shape and where water should drain
- Prepare the ground and base
- Form and pour the slab or path with joints
- Finish the surface: plain, broom, colored or stamped
- Cure and seal if desired
Want a local specialist to look at it? Request a free estimate or see typical costs.
Common questions
What does a concrete patio cost?
HomeAdvisor says typical poured patios run $6 to $15 per sq ft; Concrete Network cites an average $3,200 for about 288 sq ft.
What about walkways?
LawnStarter reports $5.89 to $12 per sq ft for concrete sidewalks, excluding land prep.
Do patios need a permit in Lubbock?
The city's residential flatwork permit line covers driveways, patios and sidewalks, per a fee-schedule summary on PermitPrice. Confirm with Building Safety.
Will a patio affect my stormwater bill?
Lubbock's stormwater utility fee is based on impervious area, which includes walkways and driveways, per the city FAQ.
Sources
- HomeAdvisor – concrete patio cost – Per-sq-ft patio ranges
- Concrete Network – concrete patio cost – Average patio cost
- LawnStarter – concrete sidewalk price – Sidewalk per-sq-ft
- City of Lubbock – FAQ – Stormwater fee and flatwork permits
Facts on this page were read from these pages on 2026-11-05.